How to fix the steel mesh？

Welded steel mesh is mainly used in roadway protection and reinforcement, concrete pavement, bridge deck paving, airport runway, tunnel lining, house floor, roof, wall, floor, concrete pipe, pile, etc.

The welding process of the metal wire mesh is controlled by the computer and the welding is durable, and the physical properties of the steel bars before and after welding are basically unchanged.

In addition to ensuring the reliability and safety of the technology, comprehensive management requirements such as schedule, work efficiency, material turnover and consumption should also be considered to improve the requirements of comprehensive management

When the tensile strength of two test pieces is less than the specified value, or when brittle fracture occurs at the weld or heat-affected zone 1, the steel mesh can determine that the joint fails once. When the joint specimen is in the weld or heat-affected zone Brittle fracture, but its tensile strength is greater than or equal to 1.1 times the specified tensile strength of the steel bar, it can be ductile fracture outside the weld or ductile fracture outside the heat-affected zone.

Reinforced concrete welded steel mesh is produced in the factory. The steel mesh reinforced concrete is made of cold-rolled ribbed steel bars or cold-rolled round steel bars. It is a kind of concrete proportioning material, which introduces the construction progress, construction quality and safety of the project. The construction method of this system has the most important meanings, which can be used for the reinforcement of reinforced concrete structures and the ordinary steel bars of prestressed concrete structures.

It can be used for single or double reinforcement. The horizontal bar can only be selected as the horizontal bar. The longitudinal and transverse steel bars of the same steel mesh can have different dimensions, but the steel bars of the same size are usually selected in the same direction.