Advantages of welded wire mesh in the construction industry

In addition to the construction of reinforced concrete prefabricated components, building meshes are more suitable for cast-in-place concrete structural components. For example, it is used in transportation, construction, agriculture, etc. The application of galvanized welded wire mesh in the transportation profession: the soft base part of the concrete pavement of expressway, concrete pavement, bridge deck pavement, rough prevention of bridge piers, concrete appearance of toll plaza, railway channel, station plaza and mixed ground of goods, airport runway, goods House yard, square concrete exterior, tunnel lining, wharf, port, etc.

In sprayed concrete, it should be built on sprayed concrete, which can improve the shear and tortuous strength of sprayed concrete, improve the scour and cutting ability of galvanized welded wire mesh, the resistance to tortuosity, improve the integrity of concrete, reduce the shortening of concrete cracks, and prevent local Block drops.

Applicable to the construction profession: multi-storey, high-rise industrial and civil buildings (foundation, floor, floor, eaves, wall, brick belt, etc.) can also be used for the laying of heating nets on the ground. Suitable for municipal support: overhead cross bridge deck paving, square concrete pavement, concrete pipe, guardrail, slope protection, etc.

There is a horizontal channel under the concrete surface, and the distance between the top surface and the bottom is less than 400mm or embedded in the base. On the top of the valve body and both sides, the outer surface of the concrete should be equipped with double-layer galvanized welded wire mesh, and the top surface and bottom surface of the base material welded mesh are 1/4 /3 thickness.

Different diameters should be used for the longitudinal and transverse reinforcement of the welded pipe network. The thickness of the maintenance layer of the steel bar should not be less than the steel bar of 50mm. Reinforced concrete pavement. It can be carried out according to the connection of the welded mesh of the reinforced concrete pavement. When the expansion joint of the concrete road surface and the heel and tail of the fixed body cannot be set, it can be adjacent to the valve body. When the galvanized welded wire mesh is connected to the bridge head, when there is a ride on the bridge head, a reinforced concrete slab should be installed between the face plate and the concrete face plate, the length of which is 6 10mm.